WinD Power

Renewables

Electric Vehicles

Essays

Latest Articles by Paul Gipe

20260221 2027 bolt 349

By

Paul Gipe

2027 Chevy Bolt Odd Noise at Low Power Levels

Since receiving our 2027 Chevy Bolt 20 February, I’ve noticed an odd noise at low power levels, upon deceleration, or at neutral or zero power levels. I’ve been driving EVs for 12 years now and the noise is not a normal EV sound. It’s not the whine of the motor/generator, …

Dean Thomas, son of Robert Thomas, the designer of the Wind Harvest Vertical Axis Wind Turbine is still plugging away on the design. He’s built a 1/40-scale model of a guyed giromill. Based on published information, the optimum solidity for maximum efficiency is 16% so he’s using four blades, two …

I’ve previously written about the history of Wind Harvest’s Vertical Axis Wind Turbine from the mid 1970s. (See Wind Harvest VAWT—a Jungian Vision (the Backstory). Recently, Dean Thomas, the son of Wind Harvest’s founder Robert Thomas, contacted me with more on the history of the turbine’s development from someone who …

We drove to Los Angeles from Bakersfield to meet a friend for lunch Sunday. That may not sound like much to those driving a gasser or a long-range, big battery EV, but it’s significant to us. We drive a 2027 Chevy Bolt, the least expensive EV in the US. We …

It’s been one month since our 2027 Bolt was hand delivered. I am still working through the new driver’s interface and changes to the controls, but we’re using it. I’ve now driven more than 1,000 miles so I can report on actual and reported range, and the traction battery’s capacity. …

Other Articles

Quebec gaspe peninsula baie des sables. neg micon 750 kw.

By

Michael Barnard

The New Geography Of Wind Power In Canada

Ontario’s return to renewable procurement is the clearest sign that one of Canada’s largest electricity markets has accepted a reality it spent years resisting. The timing is propitious as I prepare to provide an update to a global audience on North American wind energy through the World Wind Energy Association. Electricity demand is rising as transport, buildings, and industry electrify. Refusing wind and solar in that environment was never a long-term strategy. It was a pause wrapped in politics.

20231129 New Cuyama 0028

By

Steve Hanley

Whatever Happened To The Affordable Car?

Most of us have forgotten how the Big Three snookered the Obama administration into creating two classes of fuel economy standards — one for passenger cars and another for light trucks. In theory, the light truck provision was to benefit farmers who needed them to get their goods to market, but the automakers used that exception to create a whole new class of vehicles that were never intended to work for a living, The SUV originally was little more than a pickup truck with a passenger car body on top. The companies promised the Obamans they would use the bailouts offered them to build new fuel efficient small cars, but as soon as the ink was dry, they forgot all about those promises and went full tilt boogie into cranking out high end pickups and SUVs.

Accidents & Safety

I’ve been concerned about safely working with wind energy since 1976 when I nearly killed myself taking down a 1930s-era windcharger. While wind energy is an environmentally beneficial technology–and that’s the reason we need to use it–it can and has killed. Consequently, I’ve been tracking fatal accidents in wind energy since I wrote an obituary for a colleague, Terry Mehrkam, in 1981. For this reason, my books on wind energy have always included a section on safety.

Clear gif

Tower Work and Do-it-Yourselfers

By

Paul Gipe

Any wind turbine and tower that cannot be safely lowered to the ground for servicing should have a fall arresting system for ascending, descending, and working atop the tower, a sturdy work platform, and safe, clearly identifiable anchorage points for attaching your lanyard. No one should climb a tower of any type unless they’ve received training in tower safety. . .

Vanessa Skarski’s Account of Her Father’s Death on a Small Wind Turbine

By

Paul Gipe

Robert Skarski died in 1993 while installing a small wind turbine at his Illinois home. He was killed when the tower he was on buckled and fell to the ground.

Thoughts on Doing It Yourself

By

Paul Gipe

  Adapted from the book Wind Power: Renewable Energy for Home, Farm, and Business. When I wrote my first book …

Man Falls to Death from E66 in Germany

By

Paul Gipe

On October 16, 2003 a 25-year old technician fell inside a 100-meter tall Enercon E66 tower, struck his head, and died according to an account in a local German newspaper. The man, unnamed in the Prinzitger Zeitung article, was performing warranty service on a ladder when he fell.

Tower Climbing Safety

Safety

In 2013 I pulled together some links to documents on safety relative to the wind industry. These topics went beyond simply tower climbing safety and safety at height and included work around rotating machinery and other common industrial hazards. Unfortunately, the industry has changed dramatically in the past decade. Most safety documents once freely available are now securely hidden by paywalls. Moreover, even the wind energy trade associations where these documents were once located have ceased to exist, merging with other renewable trade associations. Some of the British documents are still available and I’ve provide links to them. I found one public document on the off shore industry in the USA.

Europe

Great Britain

North America

USA

Contact the Clean Power Association.

Worker Health and Safety on Offshore Wind Farms, Transportation Research Board, 2012.

Canada

Contact the Canadian Renewable Energy Association.


Mortal Accident Summary

I no longer actively track deaths in the wind industry. However, I will update my data as it becomes available. Below is a presentation updating my statistics to 2020. Also below is a link to the original article. For a complete analysis see Chapter 17 in my most recent book Wind Energy for the Rest of Us.

19_2_44_gipe_wind_breath_of_life_or_kiss_of_death_analysis_of_wind_energy_fatalities_public-jpg

Note that the spreadsheet has six tabs. This is only the summary page and does not include all the data on the summary page.

My Deaths Database is publicly available. Simply ask for it.

History of Wind Power

Niels Borre Article 1979 9th Of June, Jyllandsposten 1200x800

Niels Borre’s Checkered Past Landed in California’s Salinas Valley

By

Paul Gipe

I fell down another rabbit hole when Klaus Rockenbauer at Global-Windphotos posted images of a group of mystery wind turbines …

Golden State Wind Power 01 1200x800

Mystery Wind Turbines of the Salinas Valley Wind Rush–Solved

By

Paul Gipe

During the heyday of the Great California Wind Rush in the early to mid 1980s, there were a handful of …

Smith putnam 1,000 kw wind turbine atop granpa's knob, vermont on 30 august 1941. archives of carl wilcox. note that the blades on the downnwind, flapping rotor are feathered.

Smith-Putnam Operating Hours and Generation

By

Paul Gipe

“The turbine ran until March 26 when it threw a blade at 3.10 am. During this time it generated 61,780 …

V47 monte falcone campania italy 49

Wind Power Plants and Wind Farms Definitions

By

Paul Gipe

In recent correspondence with colleagues, I noted the unfortunate reoccurrence of the term “wind parks” to describe wind farms or …

Retrofutur Bruyerre 2023 11 20 122012 Cropped

Philippe Bruyerre’s Retrofutur: une autre histoire des machines à vents–a Review

By

Paul Gipe

Eclectic. That’s the word that comes to mind when describing Philippe Brueyerre’s Retrofutur: une autre histoire des machines à vents. …

Transpower By Vaughn Nelson In Other Wind Turbines Fig 6b

Transpower—the Flying Clothesline from the Early 1980s

By

Paul Gipe

Transpower was another of those companies that thought they had a bright idea about how to harness wind energy in …

History of Wind Power in North America

History of Wind Power Internationally

Museums with Wind Exhibits

Museums often have extensive permanent collections and only display a small portion at any one time. Museums frequently change their exhibits and that is the case below. The museums noted here have all changed their exhibits since I last visited. Some have created “virtual” exhibits, and these I’ve noted.

North American Open-Air Museums

European Open-Air Museums

There’s nothing like walking among the operating windmills of Zaanse Schaans in the Zaan district of Noord Holland, or strolling among the vertically-jutting blade sculpture at the Folkecenter for Renewable Energy in Denmark to gain a sense of the importance of wind in European–and thus Western–culture. For the avid wind aficionado and the scholar alike, I strongly suggest putting one of the many open-air museums in Europe on your travel itinerary. Some we discovered by serendipity others we searched out. All were worth the effort.

Note that in most western European countries there are national “windmill” days where many of the historical windmills are open to the public. Many now include some modern wind turbines as well. Often the national windmill day is the second Saturday in May though this may vary by country. In Germany, Deutscher Mühlentag is held on Whit Monday or Pfingstmontag in German. In 2023 Whit Monday was 29 May.

  • Museum Park, Deutsches Technikmuseum Berlin, Germany displays a historic stage mill, a mechanical farm windmill, and a micro wind turbine.
  • Schloss Sanssouci Berlin displays a reconstructed stage or gallery windmill that has served the palace (Schloss) since 1787. It was a mill on this site that served in the famous legend of the Miller of Sanssouci who challenged kingly power.
  • Windmill Blade Expo at the Folkecenter for Renewable Energy in Jutland, Denmark.
  • Showroom for historical Danish wind turbines at the Folkecenter for Renewable Energy in Jutland, Denmark–An extensive collection of wind turbine drive trains from the early days of Danish wind power.
  • Poul la Cour Museum–The museum is situated in the historical buildings where Poul la Cour, affectionately called the Danish Edison by Danes, conducted his research into wind energy and hydrogen storage. The site is the cradle of modern wind energy.
  • Energimuseet Vindkraft–The museums’ open-air exhibits include the original nacelle from the famed Gedser mill designed by Johannes Juul, an erect Riisager machine from the rebirth of Danish wind energy in the late 1970s-early 1980s, a cut-away wind turbine blade and more.
  • Frilandsmuseet–The Open Air Museum north of Copenhagen is one of the largest and oldest in the world. Spread across 86 acres of land the museum houses more than 50 farms, mills and houses from the period 1650-1950.
  • Museummolen Schermerhorn–Open air museum of the polder mill on the Schermer polder in Noord Holland (north of Amsterdam).
  • Germania (molen)–Platform grain grinding mill in the province of Groningen, the Netherlands. One of the more than 1,000 windmills in the Netherlands that are periodically open to the public.
  • Internationales Muhlenmuseum–in Gifhorn, Niedersachsen, Germany has 13 different windmills on display, including a Greek sail windmill.
  • World Heritage Site of Kinderdijk–The nineteen windmills of Kinderdijk illustrate the way the Dutch have used windmills to drain the polders that have made the Netherlands what it is today. Kinderdijk is most likely the world’s oldest wind farm and was in use into the 1950s.
  • De Vereniging Zaanse Molen–No tourist trip to the Netherlands is complete without a visit to Zaanse Schans and the working windmills of the Zaan district. The Society of Zaan Mills was founded in 1925, beginning with the restoration of the oil mill De Zoeker. Three years later, they opened the Mill Museum at Zaanse Schans. Now, nearly a century later, the Society possesses 12 industrial windmills, representing an important part of Dutch cultural heritage and to this day still define the Zaan skyline.
  • Museumdorf Cloppenburg is south of Oldenburg in Niedersachsen, Germany.
  • Nederlands Openluchtmuseum–Open Air Museum in Arnhem, Gelderland, the Netherlands.
  • Mola – het Provinciaal Molencentrum–East Flanders windmill museum in Belgium with four restored windmills.
  • Wind Energy Museum Norfolk Great Britain–The museum is closed in 2023. The collection depicts the evolution of polder drainage in what’s called the “Broads.” The technology for the mills and how to use them was imported from the Netherlands.
  • Deutsches Windkraftmuseum–Begun in 1997, the museum seeks to preserve some of the early electricity-generating wind turbines from the 1980s and 1990s in northern Germany. While the exhibits focus on German development of wind technology, the museum includes a Lagerwey, an early Dutch machine, early Danish wind turbines, and some American-made wind turbines as well, including a Kenetech drive train and a Bergey small wind turbine.
  • Allemolens.NL–Web site listing the location of every windmill in the Netherlands from the smallest mechanical wind pump to the giant polder draining windmills and to the multi-story stage windmills for grinding grain. They even include a few modern wind turbines as well. In Dutch.
  • Dutch Windmill and Watermill Database–Working historic windmills and watermills of the Netherlands with a searchable database and interactive map. The map identifies individual windmills and when they are open to visitors. The home page is in English, map data is in Dutch but understandable to English-speakers.
  • La route des moulins–Interactive map and list of windmills and watermills by region with a description of the specific mill in French. Includes a description of the Centre Molinologique.
  • Deutsche Gesellschaft für Mühlenkunde und Mühlenerhaltung–The German society for the preservation of wind and water mills. They too have an interactive map of the mills throughout the country. The map can be searched by town, village, or state. The detailed data includes the type of mill and its construction.

Other Open-Air Museums

  • Fred Turner Museum in Loeriesfontein, South Africa displays 27 water-pumping windmills.
  • Morawa District Historical Society and Museum–The small rural town of Morawa with its museum is approximately 400 kilometres north of the state capital Perth, in the northern wheatbelt of Western Australia. The Morawa Museum’s collection of Australian made and imported windmills consists of over 50 different models in various states of restoration.
  • Penong Windmill Museum–Penong, South Australia, includes the Comet, Australian-made, railroad water pumping windmill.
  • De Molen, Dutch Windmill–Foxton, New Zealand. De Molen is a full size 17th century replica Dutch windmill.
Wind turbine on the fram in pack ice 1894. nasjonalbiblioteket / national library of norway.

Nansen’s Arctic Expedition: One of the First Uses of Wind-Electric Generation

By

Paul Gipe

As part of our research into the history of wind turbines, Erik Möllerström and I came across the story of Norwegian explorer Fridtjof Nansen and his expedition on the Fram.

20210530 putnam scan 90 7748 8 30 41 extracted 01 jpg

History of Conventional Wind Turbines Published—Finally

By

Paul Gipe

The first installment of an overview of the history of conventional wind turbines was published by Swedish academic Erik Möllerström and myself 15 August. Part 1 appears in Wind Engineering, an imprint of Sage Journals. The second part will appear later this year.

James blyth s 1891 windmill jpg

July 1887: James Blyth Harnesses the Wind for Electricity

By

Daniel Garisto

Nearly a century before anyone thought seriously about wind-powered electricity, a Scotsman named James Blyth built the world’s first wind turbine in his front yard. “When a good breeze was blowing, I stored as much in half a day as gave me light for four evenings,” he wrote.

Adler25kaiserwilhelmkoog 800x1200 01 jpg

German Wind Power Museum Adds Voith Blade from the Early 80s

By

Paul Gipe

Arne Jaeger reports that the Deutsches Windkraftmuseum (the German Wind Power Museum) has obtained one of the two blades used on the Voith 520 wind turbine developed in Germany during the late 1970s and tested in the early 1980s.

Update on Betz: Everything You Need to Know about Wind Turbines Was Written in 1927

By

Paul Gipe

Herr Fedor Seidler has forwarded a link to several lengthy documents summarizing the work of Albert Betz, Ludwig Prandtl, and their colleagues at the University of Göttingen.

Turbine blade with man sitting on it likely putnam 01 jpg

Smith-Putnam Stressed Skin Blades and Bridge Construction Spar

By

Paul Gipe

Included in the correspondence from Palmer Putnam to Herman Drees is a letter from Richard Heckscher who was involved in blade development on the Smith-Putnam project. (See Palmer Putnam to Herman Drees Letter Reveals Emphasis on Swept Area.) Hecksher had alerted Putnam to the work of Herman Drees in developing Drees’ Cycloturbine.