Niels Borre’s Checkered Past Landed in California’s Salinas Valley

By Paul Gipe

I fell down another rabbit hole when Klaus Rockenbauer at Global-Windphotos posted images of a group of mystery wind turbines east from the town of Soledad. Rockenbauer photographed these wind turbines in May 2013.

Rockenbauer’s photos of the three-blade turbines created quite a stir on both sides of the Atlantic. They are not Enertech E44s and they are not like any other wind turbine I’ve ever seen—and I’ve seen a few.


This is a companion piece to Mystery Wind Turbines of the Salinas Valley Wind Rush–Solved. I felt this particular project required its own entry so I’ve pulled it out of that article and posted it here with some additional illustrations.


From his research, “In Google Earth, they were already existing on images from 1989.” That’s the post-tax credit period or after the subsidies that launched the wind rush had expired. This suggests that the turbines had been installed as part of the wind rush. However, the turbines were never reported to the state of California and don’t appear in any of the CEC’s wind project performance reports.

There appears to have been two clusters of five turbines each. In Rockenbauer’s photos there are nine turbines standing derelict. There is a foundation for the tenth turbine.

The site is located at 36° 25.590’N 121° 15.956’W (See https://maps.app.goo.gl/7PUJw3Du2EfUVZmR7.) just off of Fabry Road east of Soledad, California.

Unbeknownst to me when I stumbled down this rabbit hole, Tritt had discovered these machines in 1982 when he was wind prospecting in the Salinas Valley, an area he considered his backyard.

The project was developed, as Tritt remembers it, by a Neils Borre. Tritt describes Borre as the kind of Dane who wore gold chains around his neck, suggesting he was, shall we say, a bit more flamboyant than most Danes.

While Tritt’s memory may be a bit rusty, it’s still functioning just fine. Borre, indeed, was well known in Denmark, and therein is a tale.

Niels Borre had left a trail of wind turbine wreckage across Denmark before he popped up in California.

The first published record of Borre I came across is from 1979. Borre had reportedly developed a sailwing turbine that was marketed in California by Lund Enterprises. The sales brochure called the sailwing turbine the “windflower.” At least one turbine had been damaged in a storm in Denmark in 1977.[1],[2]


My thanks to colleagues, Jytte Thorndahl of the Danish Energy Museum, Erik Grove-Nielsen of windsofchange.dk, Arne Jaeger of the German Windpower Museum, Erik Möllerström of Högskolan i Halmstad, and Matt Tritt for helping sort out the murky wind history of the Salinas Valley and a practically unknown Danish inventor, and to Klaus Rockenbauer of Global Windphotos for the use of his photographs.


Then Jytte Thondahl of the Danish Energy Museum found a clipping in their archives from 1979 claiming that Borre had found “success” in the United States after leaving Denmark. He said he was forced to leave because the country’s bureaucracy constantly refused him approvals for his wind turbines.[3] (Danes active in the wind industry at the time have a far different take on why he left, but none would comment for the record.) Thorndahl also found a mention of a “Borremøllen” in late 1976.[4]

Niels Borre Article 1979 9th Of June, Jyllandsposten 1200x800
Bureaucracy and perpetual refusals forced Dane to the United States—then came success. Jyllands Posten, 9 June 1979. Provided by Jytte Thorndahl, Danish Museum of Energy.

Preben Maegaard, one of Denmark’s wind pioneers, devotes several pages of the book, Wind Power for the World, to Niels Borre. It’s a damning account, though some of the details may have become muddled over the decades, according to Erik Grove-Nielsen.[5]

Vawt Solhaven 2 Skive Provided By Erik Grove Nielsen
Photo of a straight-blade VAWT in the late 1970s at Solhaven 2, Skive, Denmark provided By Erik Grove Nielsen of windsofchange.dk.

Maegaard describes one event in 1976 when, for whatever reason, the Borre wind turbine was motored to show it spinning. This likely didn’t go down well with Maegaard and the other Danes present and that was the reason Maegaard mentions it.[6]

Subsequently, Borre developed a giromill in the fall of 1977, according to Maegaard. At an open house to exhibit the device, the wind turbine again failed to turn in what Maegaard describes as “ample” wind. And in a repeat of the previous experience, the turbine was motored to “give some illusion of [it] being a wind turbine,” says Maegaard critically.

Dansk Vindkraft Risoe 1980 002 1200x800
Risø National Laboratory, 1980, EWEA conference. Giromill was manufactured by Dansk Vindkraft Industri ApS ( Finn Wiinberg). Diameter of the Rotor is 9 meter. The length of each Aluminum Blade: 5.5 meter. Generator 15 kW – Rotor running at 50 r.p.m. Pitching of the blades is used as Air Brake. Description from Erik Grove-Nielsen. Photo by Paul Gipe, 1980. A photo of the same wind turbine is included in Preben Maegaard’s section on Borre in Windpower for the World.

Worse was yet to come. Borre designed a giromill for Dansk Vindkraft Industri. This giromill was installed at the Risø test station for small windmills, and was standing when I visited in 1980. It’s important to note that this wind turbine was not called or known as a Borre design. As such, those at Risø don’t remember ever testing a “Borre” wind turbine.

Regardless of what it was called, or who manufactured it, Maegaard said the turbine went into overspeed during high winds, forcing Risø to call in a mechanic to lasso the machine to a stop.[7] This didn’t work and the machine destroyed itself, writes Maegaard.

And the failures continued to pile up for Borre. He then lost two conventional wind turbines in windy northwest Jutland. Unfortunately for the farmer that bought the turbines, Borre had already left for sunnier climes where he was selling himself as “Mr. Windpower,” sneers Maegaard.

And that’s where Borre’s exploits enters our story in the Salinas Valley. Arne Jaeger of the German Windpower Museum dug through his voluminous files and found an advertisement from 1984 for the “Moneymaker.”[8] Yes, that’s what Golden State Windpower called the “Borre kW Danish-American WECS.” This was the height of the California Wind Rush and WECs was technocratic jargon for Wind Energy Conversion Device. That they publicly called this machine a “moneymaker” should have been a tip off to sophisticated investors to steer clear of this particular “wind turbine.”

Golden State Wind Power 01 800x1200
Advertisement in a 1984 issue of Alternative Sources of Energy Magazine from the archives of Arne Jaeger, German Windpower Museum.

All of this is to explain why the wind turbines in Rockenbauer’s photos look like they had a Danish influence because they did. But it also explains why Tritt said these machines gave him the impression that something was missing, because there probably was. Borre had never built a functioning and reliable wind turbine before he left Denmark. And it appears he had no better experience in California.

So, here are the specifications of the Borre’s Soledad wind turbine from that long ago advertisement.

  • 3 blade, upwind rotor
  • 41 feet (12.5 meters) diameter
  • 50 foot (15.2 meters) truss tower
  • Danish profile, sheet-metal covered blades
  • Overspeed control is by mechanically yawing across the wind
  • Planetary gearbox (yet claims “direct drive rotor, gearbox, & generator!”)
  • 60 rpm

The ad goes to say the wind turbine will have a “Long life at less than $1,000 per kW.” They’ve certainly been derelict for a very long time—for more than 40 years. In that sense, they have had a long life.  The “Moneymaker” would cost $50,000 per turbine. For the ten turbines near Soledad, someone lost at least ½ million in 1980s dollars.


[1] K.H. Hohenemser, “Sailwing Wind Energy Systems,” in Wind Energy Innovative Systems, SERI/TP-49-184, 1979, 283–99, https://books.google.com/books?id=Gu0f_ML_1DkC. Note that I could not find any other reference that Niels Borre had built a sailwing wind turbine.

[2] Not to be confused with Claus Nybroe’s “Windflower,” a multiblade turbine with a direct-drive generator in Denmark during this period. Erik Grove-Nielsen, “Winds Of Change: Stories of a Dawning Wind Power Industry,” Winds of Change, accessed March 11, 2024, https://www.windsofchange.dk/WOC-danturb.php.

[3] Niels-Victor Christiansen, “Bureaukrati og evige afslag tvang dansker til USA—så kom succesn,” Jyllands Posten, June 9, 1979.

[4] Jytte Thorndahl, “New Information 2 RE: Niels Borre Windmoelle i Danmark?,” March 18, 2024.

[5] Erik Grove-Nielsen, “Niels Borre in Denmark,” March 11, 2024.

[6] Preben Maegaard, “16. Consigned to Oblivion,” in Wind Power for the World: The Rise of Modern Wind Energy, vol. 1 (Singapore: Stanford Publishing, 2013), 355–87. Page 374.

[7] This isn’t as crazy as it sounds. Maegaard notes that this was used to stop run-away La Cour turbines up into the 1950s. I remember it being used when I started with Zond in 1984 to corral run-away Danish machines in high winds.

[8] “Golden State Wind Power’s 50 kW Borre Danish-American WECs the ‘Moneymaker,’” Alternative Sources of Energy Magazine, October 1984.