WinD Power

Renewables

Electric Vehicles

Essays

Latest Articles by Paul Gipe

Figure 18 08gipe16zondsafety 1

By

Paul Gipe

Passerby Killed by Wind Turbine in Japan

A cyclist was killed by falling wind turbine blade in Japan. To my knowledge this is the first case of a passerby being killed by a wind turbine. The 81-year old man was cycling near the wind turbine on what appears is a paved bicycle path. Takashi Shishido was likely …

Paul Gipe Calseh Photos Old Hvac Trane 02

By

Paul Gipe

Stop Burning Stuff Home Electrification

Presentation for Kern County’s Nature Center at Hart Park for delivery Sunday 15 June on our journey to converting our fossil gas appliances to electricity. Check against delivery. Stop Burning Stuff Home Electrification

While archiving articles I’d written for the American Wind Energy Association’s newsletter, Wind Energy Weekly, I came across this one about Fayette’s restructuring in 1990. At the time I was the west coast representative for AWEA in Tehachapi. There’s not a lot on my web site about Fayette. (I do mention them in my books and in articles on capacity factor and how this figure of merit can be so misleading.) Consequently, for historical reference I am posting the article with the original date that I submitted it to AWEA. See Fayette Reborn in Major Restructuring.

We’ve completed our journey to electrification that began shortly after Congress passed the Inflation Reduction Act (IRA) in mid 2022. We no longer “burn stuff” that is, we’re no longer using fossil fuels in our home.[1] In response to incentives in the IRA and to those offered by the state …

Paul Gipe Calseh Photos New Bosch Hvac Heat Pump 06

By

Paul Gipe

Electrification: Heat Pump Home Heating

Formerly, we heated our home with fossil gas as nearly 50% of American families still do.[1] After powering a conventional automobile, heating with gas for us was the second largest consumer of fossil fuels in our household. We converted our cars to electricity a decade ago and we haven’t looked …

Other Articles

Figure 18 08gipe16zondsafety 1

By

Paul Gipe

Passerby Killed by Wind Turbine in Japan

A cyclist was killed by falling wind turbine blade in Japan. To my knowledge this is the first case of a passerby being killed by a wind turbine. The 81-year old man was cycling near the wind turbine on what appears is a paved bicycle path. Takashi Shishido was likely …

The path to Canada’s electrified future is clear and achievable. It offers a chance not only to radically reduce greenhouse gas emissions but also to build a stronger, more resilient economy, foster innovation, and secure sustainable energy independence. Leveraging insights gained from Ireland’s process, Canada can confidently embark on its energy transition journey, transforming its abundant renewable resources into lasting prosperity and environmental stewardship for generations to come.

Accidents & Safety

I’ve been concerned about safely working with wind energy since 1976 when I nearly killed myself taking down a 1930s-era windcharger. While wind energy is an environmentally beneficial technology–and that’s the reason we need to use it–it can and has killed. Consequently, I’ve been tracking fatal accidents in wind energy since I wrote an obituary for a colleague, Terry Mehrkam, in 1981. For this reason, my books on wind energy have always included a section on safety.

Clear Gif

Tower Work and Do-it-Yourselfers

By

Paul Gipe

Any wind turbine and tower that cannot be safely lowered to the ground for servicing should have a fall arresting system for ascending, descending, and working atop the tower, a sturdy work platform, and safe, clearly identifiable anchorage points for attaching your lanyard. No one should climb a tower of any type unless they’ve received training in tower safety. . .

Vanessa Skarski’s Account of Her Father’s Death on a Small Wind Turbine

By

Paul Gipe

Robert Skarski died in 1993 while installing a small wind turbine at his Illinois home. He was killed when the tower he was on buckled and fell to the ground.

Thoughts on Doing It Yourself

By

Paul Gipe

  Adapted from the book Wind Power: Renewable Energy for Home, Farm, and Business. When I wrote my first book …

Man Falls to Death from E66 in Germany

By

Paul Gipe

On October 16, 2003 a 25-year old technician fell inside a 100-meter tall Enercon E66 tower, struck his head, and died according to an account in a local German newspaper. The man, unnamed in the Prinzitger Zeitung article, was performing warranty service on a ladder when he fell.

Tower Climbing Safety

Safety

In 2013 I pulled together some links to documents on safety relative to the wind industry. These topics went beyond simply tower climbing safety and safety at height and included work around rotating machinery and other common industrial hazards. Unfortunately, the industry has changed dramatically in the past decade. Most safety documents once freely available are now securely hidden by paywalls. Moreover, even the wind energy trade associations where these documents were once located have ceased to exist, merging with other renewable trade associations. Some of the British documents are still available and I’ve provide links to them. I found one public document on the off shore industry in the USA.

Europe

Great Britain

North America

USA

Contact the Clean Power Association.

Worker Health and Safety on Offshore Wind Farms, Transportation Research Board, 2012.

Canada

Contact the Canadian Renewable Energy Association.


Mortal Accident Summary

I no longer actively track deaths in the wind industry. However, I will update my data as it becomes available. Below is a presentation updating my statistics to 2020. Also below is a link to the original article. For a complete analysis see Chapter 17 in my most recent book Wind Energy for the Rest of Us.

19_2_44_gipe_wind_breath_of_life_or_kiss_of_death_analysis_of_wind_energy_fatalities_public-jpg

Note that the spreadsheet has six tabs. This is only the summary page and does not include all the data on the summary page.

My Deaths Database is publicly available. Simply ask for it.

History of Wind Power

James Blyth University Of Strathclyde

The Scots engineer who pioneered the wind turbine

By

External Source

When James Blyth created what many believe was the world’s first wind turbine in 1887, villagers dismissed it as the “work of the devil”. The huge structure at Blyth’s family home in the Aberdeenshire village of Marykirk was built with four cloth sails and generated enough power to light 10 bulbs along with a small lathe. It is said that he offered to light the streets of the village with his electricity but the offer was shunned. Blyth’s vision of a future powered by wind only started to be realised many decades after his death

Flowind Altamont Pass004 1200x800

Explanation for FloWind Blade Failures by an Eyewitness

By

Paul Gipe

Because of my critical articles on Vertical-Axis Wind Turbines, Wind Harvest’s Kevin Wolf contacted me with background on what failed …

Niels Borre Article 1979 9th Of June, Jyllandsposten 1200x800

Niels Borre’s Checkered Past Landed in California’s Salinas Valley

By

Paul Gipe

I fell down another rabbit hole when Klaus Rockenbauer at Global-Windphotos posted images of a group of mystery wind turbines …

Golden State Wind Power 01 1200x800

Mystery Wind Turbines of the Salinas Valley Wind Rush–Solved

By

Paul Gipe

During the heyday of the Great California Wind Rush in the early to mid 1980s, there were a handful of …

Smith Putnam 1,000 Kw Wind Turbine Atop Granpa's Knob, Vermont On 30 August 1941. Archives Of Carl Wilcox. Note That The Blades On The Downnwind, Flapping Rotor Are Feathered.

Smith-Putnam Operating Hours and Generation

By

Paul Gipe

“The turbine ran until March 26 when it threw a blade at 3.10 am. During this time it generated 61,780 …

V47 Monte Falcone Campania Italy 49

Wind Power Plants and Wind Farms Definitions

By

Paul Gipe

In recent correspondence with colleagues, I noted the unfortunate reoccurrence of the term “wind parks” to describe wind farms or …

History of Wind Power in North America

History of Wind Power Internationally

Museums with Wind Exhibits

Museums often have extensive permanent collections and only display a small portion at any one time. Museums frequently change their exhibits and that is the case below. The museums noted here have all changed their exhibits since I last visited. Some have created “virtual” exhibits, and these I’ve noted.

North American Open-Air Museums

European Open-Air Museums

There’s nothing like walking among the operating windmills of Zaanse Schaans in the Zaan district of Noord Holland, or strolling among the vertically-jutting blade sculpture at the Folkecenter for Renewable Energy in Denmark to gain a sense of the importance of wind in European–and thus Western–culture. For the avid wind aficionado and the scholar alike, I strongly suggest putting one of the many open-air museums in Europe on your travel itinerary. Some we discovered by serendipity others we searched out. All were worth the effort.

Note that in most western European countries there are national “windmill” days where many of the historical windmills are open to the public. Many now include some modern wind turbines as well. Often the national windmill day is the second Saturday in May though this may vary by country. In Germany, Deutscher Mühlentag is held on Whit Monday or Pfingstmontag in German. In 2023 Whit Monday was 29 May.

  • Museum Park, Deutsches Technikmuseum Berlin, Germany displays a historic stage mill, a mechanical farm windmill, and a micro wind turbine.
  • Schloss Sanssouci Berlin displays a reconstructed stage or gallery windmill that has served the palace (Schloss) since 1787. It was a mill on this site that served in the famous legend of the Miller of Sanssouci who challenged kingly power.
  • Windmill Blade Expo at the Folkecenter for Renewable Energy in Jutland, Denmark.
  • Showroom for historical Danish wind turbines at the Folkecenter for Renewable Energy in Jutland, Denmark–An extensive collection of wind turbine drive trains from the early days of Danish wind power.
  • Poul la Cour Museum–The museum is situated in the historical buildings where Poul la Cour, affectionately called the Danish Edison by Danes, conducted his research into wind energy and hydrogen storage. The site is the cradle of modern wind energy.
  • Energimuseet Vindkraft–The museums’ open-air exhibits include the original nacelle from the famed Gedser mill designed by Johannes Juul, an erect Riisager machine from the rebirth of Danish wind energy in the late 1970s-early 1980s, a cut-away wind turbine blade and more.
  • Frilandsmuseet–The Open Air Museum north of Copenhagen is one of the largest and oldest in the world. Spread across 86 acres of land the museum houses more than 50 farms, mills and houses from the period 1650-1950.
  • Museummolen Schermerhorn–Open air museum of the polder mill on the Schermer polder in Noord Holland (north of Amsterdam).
  • Germania (molen)–Platform grain grinding mill in the province of Groningen, the Netherlands. One of the more than 1,000 windmills in the Netherlands that are periodically open to the public.
  • Internationales Muhlenmuseum–in Gifhorn, Niedersachsen, Germany has 13 different windmills on display, including a Greek sail windmill.
  • World Heritage Site of Kinderdijk–The nineteen windmills of Kinderdijk illustrate the way the Dutch have used windmills to drain the polders that have made the Netherlands what it is today. Kinderdijk is most likely the world’s oldest wind farm and was in use into the 1950s.
  • De Vereniging Zaanse Molen–No tourist trip to the Netherlands is complete without a visit to Zaanse Schans and the working windmills of the Zaan district. The Society of Zaan Mills was founded in 1925, beginning with the restoration of the oil mill De Zoeker. Three years later, they opened the Mill Museum at Zaanse Schans. Now, nearly a century later, the Society possesses 12 industrial windmills, representing an important part of Dutch cultural heritage and to this day still define the Zaan skyline.
  • Museumdorf Cloppenburg is south of Oldenburg in Niedersachsen, Germany.
  • Nederlands Openluchtmuseum–Open Air Museum in Arnhem, Gelderland, the Netherlands.
  • Mola – het Provinciaal Molencentrum–East Flanders windmill museum in Belgium with four restored windmills.
  • Wind Energy Museum Norfolk Great Britain–The museum is closed in 2023. The collection depicts the evolution of polder drainage in what’s called the “Broads.” The technology for the mills and how to use them was imported from the Netherlands.
  • Deutsches Windkraftmuseum–Begun in 1997, the museum seeks to preserve some of the early electricity-generating wind turbines from the 1980s and 1990s in northern Germany. While the exhibits focus on German development of wind technology, the museum includes a Lagerwey, an early Dutch machine, early Danish wind turbines, and some American-made wind turbines as well, including a Kenetech drive train and a Bergey small wind turbine.
  • Allemolens.NL–Web site listing the location of every windmill in the Netherlands from the smallest mechanical wind pump to the giant polder draining windmills and to the multi-story stage windmills for grinding grain. They even include a few modern wind turbines as well. In Dutch.
  • Dutch Windmill and Watermill Database–Working historic windmills and watermills of the Netherlands with a searchable database and interactive map. The map identifies individual windmills and when they are open to visitors. The home page is in English, map data is in Dutch but understandable to English-speakers.
  • La route des moulins–Interactive map and list of windmills and watermills by region with a description of the specific mill in French. Includes a description of the Centre Molinologique.
  • Deutsche Gesellschaft für Mühlenkunde und Mühlenerhaltung–The German society for the preservation of wind and water mills. They too have an interactive map of the mills throughout the country. The map can be searched by town, village, or state. The detailed data includes the type of mill and its construction.

Other Open-Air Museums

  • Fred Turner Museum in Loeriesfontein, South Africa displays 27 water-pumping windmills.
  • Morawa District Historical Society and Museum–The small rural town of Morawa with its museum is approximately 400 kilometres north of the state capital Perth, in the northern wheatbelt of Western Australia. The Morawa Museum’s collection of Australian made and imported windmills consists of over 50 different models in various states of restoration.
  • Penong Windmill Museum–Penong, South Australia, includes the Comet, Australian-made, railroad water pumping windmill.
  • De Molen, Dutch Windmill–Foxton, New Zealand. De Molen is a full size 17th century replica Dutch windmill.
Charles E Miller Tip Brake Jpg

Was Anderson’s Miller First with Pitchable Blade Tips for Wind Turbines?

By

Paul Gipe

Miller is practically unknown among historians for his contribution to wind energy technology. He could be an unsung Hoosier hero for his invention of the pitchable blade tip.

Roueire Bollee Rotor Jpg

French Water-Pumping Windmills and Éolienne Bollée

By

Paul Gipe

In the research for my forthcoming book, Wind Energy for the Rest of Us, I came across a lot of intriguing information about the development of wind energy. While fascinating, much of it is too far afield for one book on wind energy. So I am posting these items on my web site so they’re searchable–by me as well as others.

Charles Miller Four Blade Wind Turbine 1926 Jpg

Charles Miller’s Four Blade Turbine of 1926: Indiana’s Contribution to Wind Energy History

By

Paul Gipe

Miller was an inveterate inventor and the Madison County (Indiana) Historical Society has an exhibited devoted to his work. It was here that I first saw a clipping of his wind turbine.

Windmill Day Groningen Netherlands 02 Jpg

Dutch Transplant Wants to Save a Czech Watermill

By

Paul Gipe

Wherein we reconnect with a Dutch miller and learn of his campaign to preserve his adopted country’s watermills.

1852 Dutch Windmill Netherlands 01 02 Jpg

Photos of Germania, Zilvermeeuw, Kinderdijk, and Zaanse Schans Windmills Posted

By

Paul Gipe

I am continuing to update my web site by posting a series of photographs taken many years ago of Dutch …

Charles E Miller Wind Turbine Jpg

Was Anderson Indiana a Part of Wind Industry History?

By

Paul Gipe

I don’t have a good answer to that question. All I know is that I stumbled a cross a faded newspaper clipping at the Madison County Historical Society that pictured a wind turbine that I’d never seen before. Not only was it an unknown wind turbine—to me certainly—but that I’d never seen reference to it or its inventor Charles E. Miller before.