WinD Power

Renewables

Electric Vehicles

Essays

Latest Articles by Paul Gipe

Pxl 20250312 214231595

By

Paul Gipe

Steps to Electrification: Dumping Fossil Fuels

This is the first in a series of articles on electrifying our house so we can “stop burning stuff.” Yes, we already have electricity, but we use fossil gas for heat, hot water, and cooking. That’s what we plan to electrify, eliminating fossil gas from our home. Our gas is provided by PG&E (Pacific Gas & Electric Co.), our notorious utility company. Notorious because it killed eight people in San Bruno, California in a massive gas explosion in 2010 then they followed that up by killing another 85 people by starting the Camp Fire in 2018. In 2020 the company filed for bankruptcy, and since then been resuscitated. However, to its customers it’s still the same old PG&E.

Historian Robert Righter and others have noted that the diameter of Charles Brush’s wind dynamo was 56 feet or about 17 meters in diameter.[1] However, a question has arisen over whether this is accurate or not. The question arises from the famous photo of a man mowing the lawn near …

20250219 Asilomar 0021

By

Paul Gipe

EV Charging: Where it Can Lead You

Stopping to charge your EV on a road trip may seem an inconvenience to some, but not to us. True, charging takes longer than filling up with gasoline in a gasser. But we’ve learned to turn the longer EV refueling stop to our advantage. We get out, stretch our legs, …

Sven Ruin Cellpart Jba Wind Turbine Sweden Closeup

By

Paul Gipe

Sweden’s JBA Vind Now Open Source

Sven Ruin, an engineering consultant with the family firm TEROC, has notified me that the former Swedish wind turbine manufacturer JBA Vind has put the design for their 15 kW and 22 kW models in the public domain. The design for the three-blade, upwind turbines are now open source under …

In preparation for an interview with British journalist Henry Sanderson about the significance of Charles Brush’s windmill in Cleveland, Ohio I jotted down some observations. During the past decade I’ve been posting articles on the history of wind energy. These notes represent thoughts on the wind inventions of the late …

Other Articles

This is the first in a series of articles on electrifying our house so we can “stop burning stuff.” Yes, we already have electricity, but we use fossil gas for heat, hot water, and cooking. That’s what we plan to electrify, eliminating fossil gas from our home. Our gas is provided by PG&E (Pacific Gas & Electric Co.), our notorious utility company. Notorious because it killed eight people in San Bruno, California in a massive gas explosion in 2010 then they followed that up by killing another 85 people by starting the Camp Fire in 2018. In 2020 the company filed for bankruptcy, and since then been resuscitated. However, to its customers it’s still the same old PG&E.

Henry Sanderson’s first podcast of An Electric Revolution is on Charles Brush: America’s Wind Power Pioneer. In 1888, a tall wind turbine in the backyard of a grand mansion on Cleveland’s Euclid Avenue caught the attention of many. To most passers-by, it seemed like an unusual curiosity—perhaps the toy of …

Accidents & Safety

I’ve been concerned about safely working with wind energy since 1976 when I nearly killed myself taking down a 1930s-era windcharger. While wind energy is an environmentally beneficial technology–and that’s the reason we need to use it–it can and has killed. Consequently, I’ve been tracking fatal accidents in wind energy since I wrote an obituary for a colleague, Terry Mehrkam, in 1981. For this reason, my books on wind energy have always included a section on safety.

Regular safety training could prevent wind farm deaths, study claims

By

David Mcphee

Research published today by Glasgow Caledonian University (GCU) claims that wind farm technicians often struggle to recall key safety instructions.

What instances of attempted murder or significant violence have occurred against wind industry personnel?

By

Michael Barnard

Recently a Dutch wind farm developer’s home was firebombed. Dutch Wind Developer Fire Bombed What other instances of violence against wind industry staff have occurred?

Bob Jans' Bmw I3 Destroyed After Fire Bombing.

Dutch Wind Developer Fire Bombed

By

Paul Gipe

Sometime around midnight 10-11 April the home of Bob Jans was firebombed in Assen, the Netherlands. Both Jans and his wife were home, asleep at the time.

Police probe Whitelee fatality

By

Investigators are looking into the possibility that the man may have taken his own life, it is understood.

Kilgallioch wind farm accident death worker identified

By

Police have identified a worker who died in an accident on a wind farm site in the south of Scotland.

Balfour Beatty fined £2.6m following death of Heysham wind farm worker

By

James Sim, 32, was working in a trench laying ducting for new cable for an offshore wind farm being built off the coast at Heysham in April 2010.

DK reopens diver death case

By

Danish authorities are to re-open an investigation into a diver’s death while working on an offshore wind farm in the German North Sea.

Man (20s) killed while clearing trees as part of wind farm extension project

By

Adam Cullen

It is understood that the man had been working on the €145m Meenadreen wind farm extension project when the tragedy occurred.

Two companies fined after death of wind turbine technician

By

Health & Safety Executive

It was during this process that Colin Sinclair’s harness became entangled in the high-speed shaft coupling, causing him to be pulled in towards the shaft.

Worker from Invenergy wind project dies

By

A construction worker was killed in an accident Wednesday morning near Invenergy’s 73.5MW Prairie Breeze 2 wind project under construction in Nebraska.

Tower Climbing Safety

Safety

In 2013 I pulled together some links to documents on safety relative to the wind industry. These topics went beyond simply tower climbing safety and safety at height and included work around rotating machinery and other common industrial hazards. Unfortunately, the industry has changed dramatically in the past decade. Most safety documents once freely available are now securely hidden by paywalls. Moreover, even the wind energy trade associations where these documents were once located have ceased to exist, merging with other renewable trade associations. Some of the British documents are still available and I’ve provide links to them. I found one public document on the off shore industry in the USA.

Europe

Great Britain

North America

USA

Contact the Clean Power Association.

Worker Health and Safety on Offshore Wind Farms, Transportation Research Board, 2012.

Canada

Contact the Canadian Renewable Energy Association.


Mortal Accident Summary

I no longer actively track deaths in the wind industry. However, I will update my data as it becomes available. Below is a presentation updating my statistics to 2020. Also below is a link to the original article. For a complete analysis see Chapter 17 in my most recent book Wind Energy for the Rest of Us.

19_2_44_gipe_wind_breath_of_life_or_kiss_of_death_analysis_of_wind_energy_fatalities_public-jpg

Note that the spreadsheet has six tabs. This is only the summary page and does not include all the data on the summary page.

My Deaths Database is publicly available. Simply ask for it.

History of Wind Power

Wind Turbine 1888 Charles Brush Cropped

What was the Diameter of Charles Brush’s Wind Dynamo?

By

Paul Gipe

Historian Robert Righter and others have noted that the diameter of Charles Brush’s wind dynamo was 56 feet or about …

Wind Turbine 1888 Charles Brush Cropped

Charles Brush: America’s Wind Power Pioneer–a Podcast

By

External Source

Henry Sanderson’s first podcast of An Electric Revolution is on Charles Brush: America’s Wind Power Pioneer. In 1888, a tall …

Friedlander Side View 01

Charles Brush and Some Notes on Early Wind Turbine Development

By

Paul Gipe

In preparation for an interview with British journalist Henry Sanderson about the significance of Charles Brush’s windmill in Cleveland, Ohio …

Daf Indal Kortrightcentre0005

DAF-Indal: The Canadian Darrieus

By

Paul Gipe

DAF-Indal[1] began working with Canada’s National Research Council and provincial utilities to develop Darrieus wind turbines using Canada’s abundant aluminum in the mid 1970s.[2] They constructed about a dozen small prototype Darrieus turbines less than 5 meters in diameter and about 9 meters tall in the mid to late 1970s, rated variously from 4 kW to 12 kW.[3] One was installed in the Arctic for Canada’s Defence Research Establishment.[4] Another was installed in Texas at the USDA’s Bushland Experiment Station in a wind-assisted pumping test. Another was installed on Block Island, Rhode Island.[5] One was still standing—inoperative–outside Toronto in 2007.[6]

Turbine Blade With Man Sitting On It Likely Putnam

Updated–Smith-Putnam Stainless Steel Strap Found on Grandpa’s Knob Seeking a Home

By

Paul Gipe

No, not recently, not by a long shot. Paul Bergman found a piece of torn and twisted stainless steel on …

Utrc Pendulum Composite Bearingless Rotor

Failed Dream: the Bearingless Wind Turbine Rotor of the Late 1970s

By

Paul Gipe

On paper the composite bearingless rotor seemed too good to be true: a wind turbine rotor that enabled the blades to change pitch without bearings in the hub. And the wind turbine would passively use aerodynamic forces to orient the rotor downwind of the tower. It was the height of simplicity and would be cheap to build. What could go wrong? The short answer: everything. Eventually the nearly 400 wind turbines using the concept in California during the Great California Wind Rush of the early to mid 1980s were scraped off the face of the earth for scrap. And therein lays a sprawling tale.

12321 Next

History of Wind Power in North America

History of Wind Power Internationally

Museums with Wind Exhibits

Museums often have extensive permanent collections and only display a small portion at any one time. Museums frequently change their exhibits and that is the case below. The museums noted here have all changed their exhibits since I last visited. Some have created “virtual” exhibits, and these I’ve noted.

North American Open-Air Museums

European Open-Air Museums

There’s nothing like walking among the operating windmills of Zaanse Schaans in the Zaan district of Noord Holland, or strolling among the vertically-jutting blade sculpture at the Folkecenter for Renewable Energy in Denmark to gain a sense of the importance of wind in European–and thus Western–culture. For the avid wind aficionado and the scholar alike, I strongly suggest putting one of the many open-air museums in Europe on your travel itinerary. Some we discovered by serendipity others we searched out. All were worth the effort.

Note that in most western European countries there are national “windmill” days where many of the historical windmills are open to the public. Many now include some modern wind turbines as well. Often the national windmill day is the second Saturday in May though this may vary by country. In Germany, Deutscher Mühlentag is held on Whit Monday or Pfingstmontag in German. In 2023 Whit Monday was 29 May.

  • Museum Park, Deutsches Technikmuseum Berlin, Germany displays a historic stage mill, a mechanical farm windmill, and a micro wind turbine.
  • Schloss Sanssouci Berlin displays a reconstructed stage or gallery windmill that has served the palace (Schloss) since 1787. It was a mill on this site that served in the famous legend of the Miller of Sanssouci who challenged kingly power.
  • Windmill Blade Expo at the Folkecenter for Renewable Energy in Jutland, Denmark.
  • Showroom for historical Danish wind turbines at the Folkecenter for Renewable Energy in Jutland, Denmark–An extensive collection of wind turbine drive trains from the early days of Danish wind power.
  • Poul la Cour Museum–The museum is situated in the historical buildings where Poul la Cour, affectionately called the Danish Edison by Danes, conducted his research into wind energy and hydrogen storage. The site is the cradle of modern wind energy.
  • Energimuseet Vindkraft–The museums’ open-air exhibits include the original nacelle from the famed Gedser mill designed by Johannes Juul, an erect Riisager machine from the rebirth of Danish wind energy in the late 1970s-early 1980s, a cut-away wind turbine blade and more.
  • Frilandsmuseet–The Open Air Museum north of Copenhagen is one of the largest and oldest in the world. Spread across 86 acres of land the museum houses more than 50 farms, mills and houses from the period 1650-1950.
  • Museummolen Schermerhorn–Open air museum of the polder mill on the Schermer polder in Noord Holland (north of Amsterdam).
  • Germania (molen)–Platform grain grinding mill in the province of Groningen, the Netherlands. One of the more than 1,000 windmills in the Netherlands that are periodically open to the public.
  • Internationales Muhlenmuseum–in Gifhorn, Niedersachsen, Germany has 13 different windmills on display, including a Greek sail windmill.
  • World Heritage Site of Kinderdijk–The nineteen windmills of Kinderdijk illustrate the way the Dutch have used windmills to drain the polders that have made the Netherlands what it is today. Kinderdijk is most likely the world’s oldest wind farm and was in use into the 1950s.
  • De Vereniging Zaanse Molen–No tourist trip to the Netherlands is complete without a visit to Zaanse Schans and the working windmills of the Zaan district. The Society of Zaan Mills was founded in 1925, beginning with the restoration of the oil mill De Zoeker. Three years later, they opened the Mill Museum at Zaanse Schans. Now, nearly a century later, the Society possesses 12 industrial windmills, representing an important part of Dutch cultural heritage and to this day still define the Zaan skyline.
  • Museumdorf Cloppenburg is south of Oldenburg in Niedersachsen, Germany.
  • Nederlands Openluchtmuseum–Open Air Museum in Arnhem, Gelderland, the Netherlands.
  • Mola – het Provinciaal Molencentrum–East Flanders windmill museum in Belgium with four restored windmills.
  • Wind Energy Museum Norfolk Great Britain–The museum is closed in 2023. The collection depicts the evolution of polder drainage in what’s called the “Broads.” The technology for the mills and how to use them was imported from the Netherlands.
  • Deutsches Windkraftmuseum–Begun in 1997, the museum seeks to preserve some of the early electricity-generating wind turbines from the 1980s and 1990s in northern Germany. While the exhibits focus on German development of wind technology, the museum includes a Lagerwey, an early Dutch machine, early Danish wind turbines, and some American-made wind turbines as well, including a Kenetech drive train and a Bergey small wind turbine.
  • Allemolens.NL–Web site listing the location of every windmill in the Netherlands from the smallest mechanical wind pump to the giant polder draining windmills and to the multi-story stage windmills for grinding grain. They even include a few modern wind turbines as well. In Dutch.
  • Dutch Windmill and Watermill Database–Working historic windmills and watermills of the Netherlands with a searchable database and interactive map. The map identifies individual windmills and when they are open to visitors. The home page is in English, map data is in Dutch but understandable to English-speakers.
  • La route des moulins–Interactive map and list of windmills and watermills by region with a description of the specific mill in French. Includes a description of the Centre Molinologique.
  • Deutsche Gesellschaft für Mühlenkunde und Mühlenerhaltung–The German society for the preservation of wind and water mills. They too have an interactive map of the mills throughout the country. The map can be searched by town, village, or state. The detailed data includes the type of mill and its construction.

Other Open-Air Museums

  • Fred Turner Museum in Loeriesfontein, South Africa displays 27 water-pumping windmills.
  • Morawa District Historical Society and Museum–The small rural town of Morawa with its museum is approximately 400 kilometres north of the state capital Perth, in the northern wheatbelt of Western Australia. The Morawa Museum’s collection of Australian made and imported windmills consists of over 50 different models in various states of restoration.
  • Penong Windmill Museum–Penong, South Australia, includes the Comet, Australian-made, railroad water pumping windmill.
  • De Molen, Dutch Windmill–Foxton, New Zealand. De Molen is a full size 17th century replica Dutch windmill.
Windtech Wind Ridge Tehachapi 1984 15 72x1200x800

UTRC, Windtech, Dynergy, & Composite Bearingless Rotor Timeline

By

Paul Gipe

For details on development of the Composite Bearingless Rotor and its derivatives see my accompanying article Failed Dream: the Bearingless …

Whitewater Wash San Gorgonio 06

NREL’s Wild West of Wind: a Glimpse of California’s Past

By

Paul Gipe

While interviewing Brian Smith about his early career during the Great California Wind Rush, he mentioned that NREL had done a retrospective on the history of the lab. Specifically, he suggested I take a look at the chapter titled the Wild West of Wind. Yee ha! Brian was right. He and Walt Musial have some great tales in that chapter. If you weren’t working in California’s wind industry then and you want a flavor of what it was like, take a look. The title is a pretty accurate summary of the times.

Kirkbymoor Dwt Helicopter

Photos of 1990s Windane Added to Site

By

Paul Gipe

While editing an article I stumbled across some photos of a Windane turbine on Pajeula Peak in the Tehachapi Pass. …

Turbine Blade With Man Sitting On It Likely Putnam

Wind power development: A historical review published

By

Paul Gipe

Another article on the history of wind turbine development has been published in the academic publication Wind Engineering, an imprint …

A Windmill Near Brighton By John Constable

Learning to love monsters: Windmills were once just machines on the land but now seem delightfully bucolic. Could wind turbines win us over too?

By

External Source

Yet perceptions of windmills have not been uniformly idyllic. Since they first appeared on the landscape of medieval Europe, windmills represented an imposition of the technological on the pastoral. They were, in the phrase of the wind energy author Paul Gipe, ‘machines in the garden’, straddling the boundary of the agrarian and mechanical.

Multilingual Lexicon By Paul Gipe

200 Term Multilingual Lexicon Posted to Wind-Works.org

By

Paul Gipe

I’ve uploaded a Multilingual Lexicon of more than 200 terms to a Google spreadsheet. The lexicon describes terms used in wind energy in six different languages: English, Dansk, Deutsch, Español, Français, and Italiano.